.png){kind=small}
How to Install the Sleepout® Curtain RodUpdated 10 days ago
Curtain Rod Installation Instructions
1. Assemble the Curtain Rod
Start by threading the curtain rod pieces together.
They should connect smoothly. If they don’t, they may not be properly aligned—double-check and realign as needed.
Make sure the pieces on each end of the rod are the ones with the head mounts (these have small holes near the ends).
2. Determine the Rod Length
Hold the assembled rod up to your window to decide on the ideal width.
We recommend going as wide and as high as possible for the best look and coverage.
3. Position the Curtains
Slide your curtains onto the rod.
Hold the rod with curtains up to the window to visualize where the brackets should go.
4. Mark Bracket Placement
Once you’ve chosen a general height and width, mark one bracket hole on the wall with a pencil.
You can either screw directly into the wall or drill a pilot hole first, about the size of the screw.
5. Center the Rod
Measure from the first bracket hole to the center of the window and note the length.
Use this same length from the center to the opposite side to mark the second bracket hole, ensuring the rod will be centered.
6. Ensure the Brackets Are Level
Check that both bracket holes are level using a level tool or by eye.
If needed, adjust one of the marks to match the other.
7. Install the Brackets
Disassemble the brackets (this makes them easier to screw in).
Screw the brackets into the marked spots.
Once the top screw is in and level on both sides, drill and install the lower screw for each bracket.
8. Final Bracket Adjustments
Reassemble the brackets on the wall.
Adjust the bracket's distance from the wall as needed.
Unscrew the thumbscrew (the small screw on the side) by hand to prepare for inserting the rod.
9. Hang the Curtains
With the thumbscrews loosened, place the curtain rod into the brackets.
If it’s hard to reach, lift one side at a time and rest the other end gently on the floor.
10. Secure the Rod
Once the rod is in place, tighten the thumbscrews by hand to secure the rod.
Please note, the curtain rod does not include end caps / finals, these may be purchased anywhere as the size is standard, they are not require to use the curtain rod and come in many different styles to match your look.